Orignal Scorpio Tango Device With Full Toyota KEY maker + 1-6 emulaters Package
WITH ORIGNAL TANGO + TOYOTA KEY MAKER + 1-6 EMULATORS
+ obd cable AND SOFTWARE
Original Scorpio-LK TANGO Key Programmer With Basic Software Supports Daihatsu G Chip Function
Top 4 Reasons To Get Tango Transponder Key Programmer:
1. 100% Original Scorpio-LK Tango
2. Free update online
3. Latest Version: V1.114
4. Supports Daihatsu G Chip Function ( Need to pay)
Connect your TANGO to computer with internet, start the software to [help]>>[check update], then you can update Tango to latest software.
1. After purchasing, you have to visit official website and update within 28 days, or it will get locked
2. If you want to get authorization for special functions or cars, please refer to this link http://www.scorpio-lk.com
Tango Software display:
Tango support those versions of Windows:
What’s the NEW feature?
After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car!
The car will be started directly, even on new FIAT CODE 2 system. And it’s also used in PSA Group vehicles!
What you only have to is writing the new file back into the immobilizer system!
Tango Software V1.114 Feature:
- Tango software added (online update)
- Again FIRST in the WORLD!
Toyota-H Immobilizer All Keys Lost solution (all markets)
SLK-06 sniffer for Toyota-H Immobilizer AKL solution
- Again FIRST in the WORLD!
True Image Generator for Toyota H-Keys (Page1 3A, 7A) on TRPWS21 transponder*
- Reset Subaru SmartKey (F3)*
- Key maker Nissan Micra 2005- (93C56,DST40)
- Key maker Nissan Tiida 2005- (93C56,DST40)
- Key maker SsangYong Action 2011- (S9S12,DST80)
- Key maker Ford Cargo 2014- (24C64,DST40)
- KKey maker Buick Excelle 2013- (9S12,DST80)
- Key maker Fiat Palio 2012- (95160,HITAG)
- Key maker SAIC Kai Yue 2013- (9S12,DST80)
- Key maker SAIC Datong V80 (95160,HITAG)
- Key maker MAN truck (M29W160,MEG13)
- Key maker BMW K19 (25160,DST80)*
- Bugs fix and optimization
Tango Software V1.113 Feature:
1.Tango software added (online update)
2.Again FIRST in the WORLD!
Copying Toyota H-key Blade (128bit) on LKP-04*
3.Again FIRST in the WORLD!
Toyota-G TRUE Image generator (Page1 19)*.
4.Reset Toyota SmartKey (AA)*
5.Key maker BMW K1600GTL (9S12,DSTAES)*
6.Key maker Cadillac ATS 2012- (95320,HITAG)
7.Key maker Geely Emgrand 2010- (93C56,HITAG)
8.Key maker SsangYong Action diesel (S9S12,DST80)
9. Bugs fix and optimization
Tango Software V1.112 Feature:
Tango software added (online update), 2018-05-09
Release Date 9th May 2018
1-Added new transponder MEGAMOS AES
2-Toyota key maker: new menu item AUTODETECT
3-Key maker Kia Sportage 2008- (MPC5xx,HITAG)
4-Key maker Hyundai Sorento 2008- (MPC5xx,HITAG)
5-Key maker Renault Fluence III 2012- (NEC850,HITAG)*
6-Key maker Renault Megane III 2012- (NEC850,HITAG)*
7-Fixed some bugs, incl. PCF7930-35 recognition
Tango Software V1.110.1 Feature:
Original Tango Key Programmer new software 1.110.1 released at the end of Nov, 2017.
[+] SLK-05 Transponder launched! Supports Toyota’s Smart Key AES
(Page1 39)emulation.This feature allows to start an engine, to
Learn new keys.
[+] TangoPlus for Toyota V6.7
True Emulation via OBD of all Smart Keys Page1 39*
The only right conception to solve the “All Keys Lost”problem.
[+] Image generator Toyota Page139 on SLK-05.The generated
Transpinder is fully compatible to Toyota requirements that A
Customer is able to learn it vla OBD.*
[+] Cloning Toyota Smart Key 128BIT(Page1 39) to SLK-05*
[+] Key maker BCM2 Audi A4/A5/Q5(95320,PCF7945AC)*
[+] Key maker BCM2 Audi A4/A5/Q5(NEC,PCF7945AC)*
[+] Key maker Ford Transit 2017-(NEC,DST80)*
[.] Improved Toyota Certification ECU maker: compatibility for keys Page139
[.] Improved operations with PCF7930,31,35. Now it is possible to make Individual settings to each type of transponders.
Tango Software V1.06 (Freely Added):
Techtream calculator: v9.30, v10.10
Key maker Citroen Jumper 2012-(95640,HITAG)*
Key maker Isuzu NPR 2007-(93C56,HITAG)
Key maker Peugeot 206 2001- (95160,HITAG)
Key maker Peugeot Partner 2002- (95160,HITAG)
Image generator Chevrolet Spark (ID8E)
Cloning of Toyota and Subaru 80 bit Keys**
Added transponders CN2, CN5 to the Clone mode
Tango software added (online update)
Key maker Toyota Yaris 2004 (93C56,4C)*
Key maker Kia Soul 2008- (TC1762,HITAG)
Key maker Isuzu KB250 2004- (93C66,4D)
Key maker Mitsubishi Fuso Canter 2009- (93C66,4D)
Key maker Fiat Ducato 2012- (95640,HITAG)*
Key maker Fiat Burstner Viseo 2011- (95640,HITAG)*
Key maker Kawasaki Denso ECU 21175-0811 (93C86,ID4D)
Key maker Peugeot Boxer 2012- (95640,HITAG)*
Key maker Peugeot Manager 2013 (95160,HITAG)*
Key maker Renault Latitude 2010- (9S12, HITAG)*
Key maker Renault Safrane 2010- (9S12, HITAG)*
Key maker Renault Samsung SM5 2010- (9S12, HITAG)*
Key maker VW New Betle (9S12, ID48EMU)
Dump maker BCM2 (95320,NEC)*
Image generator Great Wall ID40
Fixed bug EDC17 Dump editor
Tango Software V1.96.11, Tango Software Added:
Key maker Chevrolet Cruze 2008- (24C16,HITAG)
Key maker Chevrolet Lacetti 2005- (ST7,ID4D)
Key maker Renault Mascott 2002- (93C66,HITAG)
Key maker Renault Clio II 2003- (93C66,HITAG)
Key maker Hyundai Accent 2004- (93C56,ID4D)
Key maker Hyundai H1 2001- (93C56,ID4D)
Key maker Hyundai H200 2001- (93C56,ID4D)
Key maker Hyundai Santa Fe 2006- (93C56,ID4D)
Key maker Hyundai Sonata 2003- (93C56,ID4D)
Key maker Hyundai Starex 2002- (93C56,ID4D)
Key maker Hyundai Terracan 2001- (93C56,ID4D)
Key maker Hyundai Trajet 2004- (93C56,ID4D)
Key maker Kia Carnival 2002- (93C56,ID4D)
Key maker Kia Sorento 2003- (93C56,ID4D)
Key maker Volvo V40 2004- (9S12,ID48)
Key maker Volvo V50 2004- (9S12,ID48)
New pictures in help file (total 315MB)
Tango Software V1.79:
Key maker Honda Stream -2006 (93C46,ID48)
Key maker Honda Fit 2007- (93C66,HITAG)
Key maker Honda bike ECU 38770-KTW-901 (93C66,HITAG)*
Key maker Honda bike ECU 38770-MCZ-003 (93C56,HITAG)*
Key maker Honda bike ECU 38770-MFN-D01 (93C56,HITAG)*
Key maker Honda bike ECU 38770-MEE-702 (93C56,HITAG)*
Key maker UAZ Hunter (TC1762,HITAG)
Key maker Suzuki SX4 2012- (TC1762,HITAG)
Key maker Mazda B3000 2001- (95040,ID4D)
Key maker Ford Focus 2000 (77012,ID4D)
Key maker Ford Ka 2007 (93C86,ID4C)
Key maker Chrysler Voyager Limited 2008- (93C86,HITAG)
Calculator Techstream 96 digits*
New pictures in help file (total 304MB)
The device is intended for programming of transponders , that are a part of automobile immobilizing systems.
Unlike the previous model the Gambit, new model Tango is the two-band device that has allowed to add the list supported transponders with firm Texas Instruments products (Tiris ©).
The TANGO programmer is the next generation of transponder programmer which is continuously developed to cover, read, and write the latest transponders used in the newest vehicle immobilizer technologies.
New function for reading the Kilometers, VIN and transponder type for all BMW keys has been added to the BMW software module.
Please note after generating a new transponder with TANGO Programmer, you do not need any additional diagnostic equipment to program the generated transponder to the car. It will start the car directly, even on new FIAT CODE 2 system, which is also used in PSA Group vehicles. You only have to write the new file back into the immobilizer system.
The ever expanding list of key makers, currently totaling over 1116 (Over 580 are included with basic software) are available here
What transponders does Tango Key Programmer support?
PCF7930-31 writing, reading
PCF7935 writing, reading, shadow memory, crypto calculator
PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings
PCF7941 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7942 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7943 transponder, remote, Manchester & Biphase encodings
PCF7944 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7946 transponder, remote, Manchester & Biphase encodings
PCF7947 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7952 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7961 transponder, remote, Manchester & Biphase encodings
*Auto switching between PCF7936-PCF7961 windows if invalid type detected.
*Autodetect manchester / biphase
Temic 11 reading , writing to T5
Temic 12 reading , writing to T5
Megamos (13) reading , writing to T5 , emulating on PCF7930-35
Megamos (48) reading, writing, PIN, unlock by PIN, full range of memory contents, crypto calculation
Megamos CRYPTO-2 (8E) read ID, read/write EEPROM, write Cryptokey
Tiris (4C) reading
Tiris (4D) DST crypto reading, writing, crypto calculator
Tiris (4E) DST crypto reading, writing, crypto calculator
Tiris (8C) reading
TK5551M (T5 replacement)
SAAB reading , writing to T5
The product is in working out stages, therefore the list of the supported transponders will be developed later.
What’s the key maker usage?
Key maker usage consists of 4 steps. The 4-th step is additional and depends on a vehicle model.
1. Open an immobilizer dump file.
2. Choose number of the key you wanna create.
3. Place a transponder into the coil and click the WRITE button.
4. In some cases the program will ask you to save a modified immobilizer dump. This dump must to be written into the immobilizer.
First of all, take a look at above picture.
The “Loaded File” window displays the immobilizer file name.
Ensure that a valid dump is stored.
The “Maker” window displays selected maker name. Ensure the right key maker selected.
The “info” windows display an important information:
1. Original transponder—Informs you about type of the original transponder
2. Allowed transponder—Informs you what type of transponders is suitable for the key maker
3. Data location—The immobilizer memory may be stored in various chips, the description informs you about from where you have to read a dump. Some immobilizers can have various chipsets. In this case the field displays several possible chips. Find one of them inside of the immobilizer and read it.
4. Data size—Each chip has certain memory size, the key maker accepts files with the described size.
5. Data format—This field appears in case of 93CXX eeprom seria.
There are 2 standards of data layout:
1.Intel format and Motorola format or Little Endian and Big Endian respectively.
2.The data layout depends on a chip-programmer that is used for eeprom reading.This field informs you what kind of format is suitable for the key maker.Usually you can see that both formats are suitable. It means that the program can understand any data layout.
How to create a key?
Firstly, run the key maker interface according to the vehicle and read information in the “Info” window. Watch theData location field describes the memory chip. Find out the chip inside of the immobilizer and read it. Save the read data (dump).
Click the “OPEN IMMOBILIZER FILE” button and load the saved dump.
The program will analyse the dump.
If the dump is correct the “WRITE” button will become active and the “Keys” window will display the range of key numbers that can be created.
Take a look at the “Info” window, the Allowed transponder field.
Ensure you use a transponder exactly the indicated type.
Place the transponder into the coil.
Choose the key position you want to create in the “Keys” window.
Click the “WRITE” button.
This starts the writing process and transponder will be stored with the appropriate data.
At this point you may be asked to save a new immobilizer dump.
The program displays a standard File Save dialog where you have to save the data.
After this you will be informed about the new data saved and must be written into the immobiliser
Write the new dump into the immobilizer. Now it is ready to operate with the created transponder.
If you are not asked to save a new file, it means that immobilizer is ready to operate with the created transponder without file replacing.
1. ABS plastic enclosure: ingress protection IP65/DIN EN 60529
2. Rubber seal: prevents sliding on a workbench shock-proof function
3. USB connection: no external power
4. Big hole: adopted to large keys
5. 3 small holes: adopted to various sizes of transponders
Q: Hardware not found after install the software and driver, how to solve it?
A: You need to install the software v1.83 first, then v1.84, next v1.85(install the software from older to newer)
Q: Tango key programmer support update for free or not?
A: Update free You need to connect the official website to update once within 28 days, otherwise the machine will be blocked. If you need special function or work it on special car model, you need to pay for it, you can check specific cost online
Q: I reprogram a BMW key, if I can delete the reprogrammed key with Tango?
A: No, it do not support this function
Q: Is there tokens limitation for Tango? Is there any extra cost, such as update cost?
A: There is no tokens limitation for Tango. Software update online for free. But if you need special function, or want to work it on special car model, you need to pay money to open the authorization
Q: Do you have Tango user manual?
A: You can check Tango user manual in the menu after software installation